[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-11-generic (buildd@palmer) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu4) ) #38-Ubuntu SMP Fri Oct 2 11:55:55 UTC 2009 (Ubuntu 2.6.31-11.38-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.2 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 0E0000000 mask FFC000000 write-combining [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] modified: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] modified: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-15000 [ 0.000000] RAMDISK: 37984000 - 37fef504 [ 0.000000] Allocated new RAMDISK: 008a4000 - 00f0f504 [ 0.000000] Move RAMDISK from 0000000037984000 - 0000000037fef503 to 008a4000 - 00f0f503 [ 0.000000] ACPI: RSDP 000f6120 00014 (v00 Nvidia) [ 0.000000] ACPI: RSDT 3fff3000 0002C (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP 3fff3040 00074 (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT 3fff30c0 0419B (v01 NVIDIA AWRDACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 3fff0000 00040 [ 0.000000] ACPI: APIC 3fff7280 0005A (v01 Nvidia AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00011000 - 00017f00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000089f080] TEXT DATA BSS ==> [0000100000 - 000089f080] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [00008a0000 - 00008a3119] BRK ==> [00008a0000 - 00008a3119] [ 0.000000] #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] [ 0.000000] #7 [00008a4000 - 0000f0f504] NEW RAMDISK ==> [00008a4000 - 0000f0f504] [ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003fff0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003fff0 [ 0.000000] On node 0 totalpages: 262015 [ 0.000000] free_area_init_node: node 0, pgdat c077b840, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 272 pages used for memmap [ 0.000000] HighMem zone: 34530 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c1805000, static data 35068 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259967 [ 0.000000] Kernel command line: root=UUID=a8ba4faf-d9fc-4177-af7b-f8728bc85e11 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5242240 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003fff0) [ 0.000000] Memory: 1019148k/1048512k available (4543k kernel code, 28600k reserved, 2128k data, 540k init, 139208k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0785000 - 0xc080c000 ( 540 kB) [ 0.000000] .data : 0xc056ff84 - 0xc07841a8 (2128 kB) [ 0.000000] .text : 0xc0100000 - 0xc056ff84 (4543 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2079.566 MHz processor. [ 0.002140] Console: colour VGA+ 80x25 [ 0.002144] console [tty0] enabled [ 0.002207] Calibrating delay loop (skipped), value calculated using timer frequency.. 4159.13 BogoMIPS (lpj=8318264) [ 0.002236] Security Framework initialized [ 0.002271] AppArmor: AppArmor initialized [ 0.002281] Mount-cache hash table entries: 512 [ 0.002454] Initializing cgroup subsys ns [ 0.002460] Initializing cgroup subsys cpuacct [ 0.002464] Initializing cgroup subsys memory [ 0.002475] Initializing cgroup subsys freezer [ 0.002478] Initializing cgroup subsys net_cls [ 0.002492] CPU: CLK_CTL MSR was 60031223. Reprogramming to 20031223 [ 0.002497] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.002500] CPU: L2 Cache: 256K (64 bytes/line) [ 0.002515] Performance Counters: AMD PMU driver. [ 0.002523] ... version: 0 [ 0.002526] ... bit width: 48 [ 0.002528] ... generic counters: 4 [ 0.002530] ... value mask: 0000ffffffffffff [ 0.002532] ... max period: 00007fffffffffff [ 0.002534] ... fixed-purpose counters: 0 [ 0.002536] ... counter mask: 000000000000000f [ 0.002542] Checking 'hlt' instruction... OK. [ 0.016517] SMP alternatives: switching to UP code [ 0.021959] Freeing SMP alternatives: 19k freed [ 0.021991] ACPI: Core revision 20090521 [ 0.029404] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.069090] CPU0: AMD Athlon(tm) XP 2600+ stepping 01 [ 0.072001] Brought up 1 CPUs [ 0.072001] Total of 1 processors activated (4159.13 BogoMIPS). [ 0.072001] CPU0 attaching NULL sched-domain. [ 0.072001] Booting paravirtualized kernel on bare hardware [ 0.072001] regulator: core version 0.5 [ 0.072001] Time: 21:14:39 Date: 10/07/09 [ 0.072001] NET: Registered protocol family 16 [ 0.072001] EISA bus registered [ 0.072001] ACPI: bus type pci registered [ 0.101140] PCI: PCI BIOS revision 2.10 entry at 0xfb6c0, last bus=2 [ 0.101143] PCI: Using configuration type 1 for base access [ 0.102207] bio: create slab at 0 [ 0.103020] ACPI: EC: Look up EC in DSDT [ 0.108662] ACPI: Interpreter enabled [ 0.108669] ACPI: (supports S0 S1 S4 S5) [ 0.108693] ACPI: Using IOAPIC for interrupt routing [ 0.115186] ACPI: No dock devices found. [ 0.115289] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.115339] pci 0000:00:00.0: reg 10 32bit mmio: [0xe0000000-0xe3ffffff] [ 0.115357] pci 0000:00:00.0: nForce2 C1 Halt Disconnect fixup [ 0.115573] pci 0000:00:01.1: reg 10 io port: [0xe400-0xe41f] [ 0.115611] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.115616] pci 0000:00:01.1: PME# disabled [ 0.115649] pci 0000:00:02.0: reg 10 32bit mmio: [0xe8001000-0xe8001fff] [ 0.115685] pci 0000:00:02.0: supports D1 D2 [ 0.115688] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115692] pci 0000:00:02.0: PME# disabled [ 0.115720] pci 0000:00:02.1: reg 10 32bit mmio: [0xe8004000-0xe8004fff] [ 0.115756] pci 0000:00:02.1: supports D1 D2 [ 0.115758] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115763] pci 0000:00:02.1: PME# disabled [ 0.115797] pci 0000:00:02.2: reg 10 32bit mmio: [0xe8005000-0xe80050ff] [ 0.115839] pci 0000:00:02.2: supports D1 D2 [ 0.115841] pci 0000:00:02.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115846] pci 0000:00:02.2: PME# disabled [ 0.115881] pci 0000:00:04.0: reg 10 32bit mmio: [0xe8000000-0xe8000fff] [ 0.115888] pci 0000:00:04.0: reg 14 io port: [0xe000-0xe007] [ 0.115921] pci 0000:00:04.0: supports D1 D2 [ 0.115923] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.115928] pci 0000:00:04.0: PME# disabled [ 0.116006] pci 0000:00:09.0: reg 20 io port: [0xf000-0xf00f] [ 0.116059] pci 0000:00:0d.0: reg 10 32bit mmio: [0xe8002000-0xe80027ff] [ 0.116066] pci 0000:00:0d.0: reg 14 32bit mmio: [0xe8003000-0xe800303f] [ 0.116099] pci 0000:00:0d.0: supports D1 D2 [ 0.116101] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.116106] pci 0000:00:0d.0: PME# disabled [ 0.116196] pci 0000:01:07.0: reg 10 32bit mmio: [0xe7005000-0xe70057ff] [ 0.116205] pci 0000:01:07.0: reg 14 32bit mmio: [0xe7000000-0xe7003fff] [ 0.116254] pci 0000:01:07.0: PME# supported from D3hot [ 0.116259] pci 0000:01:07.0: PME# disabled [ 0.116297] pci 0000:01:08.0: reg 10 io port: [0xd000-0xd0ff] [ 0.116305] pci 0000:01:08.0: reg 14 32bit mmio: [0xe7004000-0xe7004fff] [ 0.116333] pci 0000:01:08.0: reg 30 32bit mmio: [0x000000-0x00ffff] [ 0.116353] pci 0000:01:08.0: supports D1 D2 [ 0.116356] pci 0000:01:08.0: PME# supported from D1 D2 D3hot D3cold [ 0.116361] pci 0000:01:08.0: PME# disabled [ 0.116387] pci 0000:01:09.0: reg 10 io port: [0xd400-0xd43f] [ 0.116461] pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] [ 0.116466] pci 0000:00:08.0: bridge 32bit mmio: [0xe6000000-0xe7ffffff] [ 0.116503] pci 0000:02:00.0: reg 10 32bit mmio: [0xe4000000-0xe4ffffff] [ 0.116510] pci 0000:02:00.0: reg 14 32bit mmio: [0xd0000000-0xd7ffffff] [ 0.116517] pci 0000:02:00.0: reg 18 32bit mmio: [0xd8000000-0xd807ffff] [ 0.116534] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.116590] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4000000-0xe5ffffff] [ 0.116595] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xd0000000-0xdfffffff] [ 0.116606] pci_bus 0000:00: on NUMA node 0 [ 0.116611] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.116745] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.116956] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT] [ 0.156648] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.156783] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.156915] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.157046] ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.157175] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.157306] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.157436] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.157567] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.157699] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.157830] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.157959] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.158091] ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.158221] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.158355] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.158488] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.158618] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.158740] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled. [ 0.158847] ACPI: PCI Interrupt Link [APC2] (IRQs *17) [ 0.158953] ACPI: PCI Interrupt Link [APC3] (IRQs *18) [ 0.159060] ACPI: PCI Interrupt Link [APC4] (IRQs *19) [ 0.159175] ACPI: PCI Interrupt Link [APCE] (IRQs *16), disabled. [ 0.159333] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0 [ 0.159490] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0 [ 0.159647] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0 [ 0.159802] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled. [ 0.159958] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled. [ 0.160125] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled. [ 0.160235] ACPI: PCI Interrupt Link [APCS] (IRQs *23) [ 0.160397] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0 [ 0.160555] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0 [ 0.160711] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled. [ 0.160868] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled. [ 0.161128] SCSI subsystem initialized [ 0.161236] libata version 3.00 loaded. [ 0.161342] usbcore: registered new interface driver usbfs [ 0.161362] usbcore: registered new interface driver hub [ 0.161395] usbcore: registered new device driver usb [ 0.161560] ACPI: WMI: Mapper loaded [ 0.161562] PCI: Using ACPI for IRQ routing [ 0.161741] Bluetooth: Core ver 2.15 [ 0.161776] NET: Registered protocol family 31 [ 0.161778] Bluetooth: HCI device and connection manager initialized [ 0.161782] Bluetooth: HCI socket layer initialized [ 0.161785] NetLabel: Initializing [ 0.161787] NetLabel: domain hash size = 128 [ 0.161789] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.161806] NetLabel: unlabeled traffic allowed by default [ 0.164337] pnp: PnP ACPI init [ 0.164366] ACPI: bus type pnp registered [ 0.168540] pnp: PnP ACPI: found 14 devices [ 0.168543] ACPI: ACPI bus type pnp unregistered [ 0.168548] PnPBIOS: Disabled by ACPI PNP [ 0.168566] system 00:00: ioport range 0x4000-0x407f has been reserved [ 0.168570] system 00:00: ioport range 0x4080-0x40ff has been reserved [ 0.168574] system 00:00: ioport range 0x4400-0x447f has been reserved [ 0.168577] system 00:00: ioport range 0x4480-0x44ff has been reserved [ 0.168581] system 00:00: ioport range 0x4200-0x427f has been reserved [ 0.168584] system 00:00: ioport range 0x4280-0x42ff has been reserved [ 0.168591] system 00:01: ioport range 0x5000-0x503f has been reserved [ 0.168595] system 00:01: ioport range 0x5500-0x553f has been reserved [ 0.168603] system 00:04: ioport range 0x4d0-0x4d1 has been reserved [ 0.203299] AppArmor: AppArmor Filesystem Enabled [ 0.203333] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 [ 0.203337] pci 0000:00:08.0: IO window: 0xd000-0xdfff [ 0.203344] pci 0000:00:08.0: MEM window: 0xe6000000-0xe7ffffff [ 0.203349] pci 0000:00:08.0: PREFETCH window: 0x40000000-0x400fffff [ 0.203355] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02 [ 0.203357] pci 0000:00:1e.0: IO window: disabled [ 0.203362] pci 0000:00:1e.0: MEM window: 0xe4000000-0xe5ffffff [ 0.203367] pci 0000:00:1e.0: PREFETCH window: 0xd0000000-0xdfffffff [ 0.203379] pci 0000:00:08.0: setting latency timer to 64 [ 0.203387] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.203391] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.203394] pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] [ 0.203397] pci_bus 0000:01: resource 1 mem: [0xe6000000-0xe7ffffff] [ 0.203400] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x400fffff] [ 0.203404] pci_bus 0000:02: resource 1 mem: [0xe4000000-0xe5ffffff] [ 0.203407] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.203453] NET: Registered protocol family 2 [ 0.203559] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.204011] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.205398] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.206188] TCP: Hash tables configured (established 131072 bind 65536) [ 0.206193] TCP reno registered [ 0.206321] NET: Registered protocol family 1 [ 0.206414] Trying to unpack rootfs image as initramfs... [ 0.396635] Freeing initrd memory: 6573k freed [ 0.404539] cpufreq-nforce2: Detected nForce2 chipset revision A2 [ 0.404543] cpufreq-nforce2: FSB changing is maybe unstable and can lead to crashes and data loss. [ 0.404556] cpufreq-nforce2: FSB currently at 166 MHz, FID 12.5 [ 0.404591] Marking TSC unstable due to cpufreq changes [ 0.405500] Scanning for low memory corruption every 60 seconds [ 0.405642] audit: initializing netlink socket (disabled) [ 0.405668] type=2000 audit(1254950079.404:1): initialized [ 0.408032] Switched to high resolution mode on CPU 0 [ 0.414471] highmem bounce pool size: 64 pages [ 0.414478] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.416135] VFS: Disk quotas dquot_6.5.2 [ 0.416200] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.416795] fuse init (API version 7.12) [ 0.416885] msgmni has been set to 1732 [ 0.417147] alg: No test for stdrng (krng) [ 0.417163] io scheduler noop registered [ 0.417166] io scheduler anticipatory registered [ 0.417168] io scheduler deadline registered (default) [ 0.417213] io scheduler cfq registered [ 0.417320] pci 0000:02:00.0: Boot video device [ 0.417421] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.417447] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.417599] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.417605] ACPI: Power Button [PWRF] [ 0.417661] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.417665] ACPI: Power Button [PWRB] [ 0.418051] processor LNXCPU:00: registered as cooling_device0 [ 0.420872] isapnp: Scanning for PnP cards... [ 0.774979] isapnp: No Plug & Play device found [ 0.776181] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.776306] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.776633] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.777768] brd: module loaded [ 0.778247] loop: module loaded [ 0.778351] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.778658] pata_amd 0000:00:09.0: version 0.4.1 [ 0.778736] pata_amd 0000:00:09.0: setting latency timer to 64 [ 0.778872] scsi0 : pata_amd [ 0.779006] scsi1 : pata_amd [ 0.779781] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.779785] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.780590] Fixed MDIO Bus: probed [ 0.780633] PPP generic driver version 2.4.2 [ 0.780774] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.781055] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22 [ 0.781062] alloc irq_desc for 22 on node -1 [ 0.781065] alloc kstat_irqs on node -1 [ 0.781074] ehci_hcd 0000:00:02.2: PCI INT C -> Link[APCL] -> GSI 22 (level, high) -> IRQ 22 [ 0.781093] ehci_hcd 0000:00:02.2: setting latency timer to 64 [ 0.781097] ehci_hcd 0000:00:02.2: EHCI Host Controller [ 0.781163] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 [ 0.781197] ehci_hcd 0000:00:02.2: selective suspend/wakeup unavailable [ 0.781205] ehci_hcd 0000:00:02.2: debug port 1 [ 0.781211] ehci_hcd 0000:00:02.2: cache line size of 64 is not supported [ 0.781232] ehci_hcd 0000:00:02.2: irq 22, io mem 0xe8005000 [ 0.792014] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00 [ 0.792099] usb usb1: configuration #1 chosen from 1 choice [ 0.792134] hub 1-0:1.0: USB hub found [ 0.792147] hub 1-0:1.0: 6 ports detected [ 0.792227] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.792541] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 [ 0.792547] alloc irq_desc for 21 on node -1 [ 0.792550] alloc kstat_irqs on node -1 [ 0.792559] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 21 (level, high) -> IRQ 21 [ 0.792575] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 0.792578] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 0.792629] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 0.792661] ohci_hcd 0000:00:02.0: irq 21, io mem 0xe8001000 [ 0.850081] usb usb2: configuration #1 chosen from 1 choice [ 0.850116] hub 2-0:1.0: USB hub found [ 0.850129] hub 2-0:1.0: 3 ports detected [ 0.850428] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20 [ 0.850432] alloc irq_desc for 20 on node -1 [ 0.850435] alloc kstat_irqs on node -1 [ 0.850441] ohci_hcd 0000:00:02.1: PCI INT B -> Link[APCG] -> GSI 20 (level, high) -> IRQ 20 [ 0.850451] ohci_hcd 0000:00:02.1: setting latency timer to 64 [ 0.850454] ohci_hcd 0000:00:02.1: OHCI Host Controller [ 0.850493] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3 [ 0.850520] ohci_hcd 0000:00:02.1: irq 20, io mem 0xe8004000 [ 0.906070] usb usb3: configuration #1 chosen from 1 choice [ 0.906099] hub 3-0:1.0: USB hub found [ 0.906112] hub 3-0:1.0: 3 ports detected [ 0.906169] uhci_hcd: USB Universal Host Controller Interface driver [ 0.906292] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.909258] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.909265] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.909338] mice: PS/2 mouse device common for all mice [ 0.909437] rtc_cmos 00:06: RTC can wake from S4 [ 0.909481] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 [ 0.909508] rtc0: alarms up to one year, y3k, 242 bytes nvram [ 0.909595] device-mapper: uevent: version 1.0.3 [ 0.909714] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com [ 0.909810] device-mapper: multipath: version 1.1.0 loaded [ 0.909814] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.909956] EISA: Probing bus 0 at eisa.0 [ 0.909977] Cannot allocate resource for EISA slot 4 [ 0.909980] Cannot allocate resource for EISA slot 5 [ 0.909995] EISA: Detected 0 cards. [ 0.910082] cpuidle: using governor ladder [ 0.910085] cpuidle: using governor menu [ 0.910641] TCP cubic registered [ 0.910807] NET: Registered protocol family 10 [ 0.911265] lo: Disabled Privacy Extensions [ 0.911596] NET: Registered protocol family 17 [ 0.911620] Bluetooth: L2CAP ver 2.13 [ 0.911622] Bluetooth: L2CAP socket layer initialized [ 0.911626] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.911628] Bluetooth: SCO socket layer initialized [ 0.911678] Bluetooth: RFCOMM TTY layer initialized [ 0.911682] Bluetooth: RFCOMM socket layer initialized [ 0.911684] Bluetooth: RFCOMM ver 1.11 [ 0.911688] powernow-k8: Processor cpuid 681 not supported [ 0.911710] Using IPI No-Shortcut mode [ 0.911803] PM: Resume from disk failed. [ 0.911828] registered taskstats version 1 [ 0.911965] Magic number: 13:944:246 [ 0.912109] rtc_cmos 00:06: setting system clock to 2009-10-07 21:14:40 UTC (1254950080) [ 0.912113] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.912115] EDD information not available. [ 0.931452] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.944465] ata1.00: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/100 [ 0.944469] ata1.00: 78242976 sectors, multi 16: LBA48 [ 0.944495] ata1: nv_mode_filter: 0x3f39f&0x701f->0x701f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:600:0x13) [ 0.952378] ata1.00: configured for UDMA/33 [ 0.952513] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP0411N TW10 PQ: 0 ANSI: 5 [ 0.952661] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.952711] sd 0:0:0:0: [sda] 78242976 512-byte logical blocks: (40.0 GB/37.3 GiB) [ 0.952772] sd 0:0:0:0: [sda] Write Protect is off [ 0.952775] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.952806] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.952969] sda: sda1 sda2 [ 0.960225] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.132348] ata2.00: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS05, max UDMA/33 [ 1.132379] ata2.01: ATAPI: HL-DT-ST GCE-8160B, 1.02, max MWDMA2 [ 1.132404] ata2: nv_mode_filter: 0x739f&0x701f->0x701f, BIOS=0x7000 (0xc000c000) ACPI=0x701f (60:120:0x1b) [ 1.132410] ata2: nv_mode_filter: 0x39f&0x39f->0x39f, BIOS=0x0 (0xc000c000) ACPI=0x39f (60:120:0x1b) [ 1.164279] ata2.00: configured for UDMA/33 [ 1.172413] ata2.01: configured for MWDMA2 [ 1.173395] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D162C TS05 PQ: 0 ANSI: 5 [ 1.175423] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray [ 1.175427] Uniform CD-ROM driver Revision: 3.20 [ 1.175526] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.175593] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.175859] scsi 1:0:1:0: CD-ROM HL-DT-ST CD-RW GCE-8160B 1.02 PQ: 0 ANSI: 5 [ 1.177477] sr1: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.177554] sr 1:0:1:0: Attached scsi CD-ROM sr1 [ 1.177596] sr 1:0:1:0: Attached scsi generic sg2 type 5 [ 1.177625] Freeing unused kernel memory: 540k freed [ 1.178310] Write protecting the kernel text: 4544k [ 1.178345] Write protecting the kernel read-only data: 1832k [ 1.559499] ACPI: PCI Interrupt Link [APCM] enabled at IRQ 22 [ 1.559507] ohci1394 0000:00:0d.0: PCI INT A -> Link[APCM] -> GSI 22 (level, high) -> IRQ 22 [ 1.559514] ohci1394 0000:00:0d.0: setting latency timer to 64 [ 1.566684] Floppy drive(s): fd0 is 1.44M [ 1.570917] epic100.c:v1.11 1/7/2001 Written by Donald Becker [ 1.570920] (unofficial 2.4.x kernel port, version 2.1, Sept 11, 2006) [ 1.571160] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 [ 1.571168] alloc irq_desc for 18 on node -1 [ 1.571170] alloc kstat_irqs on node -1 [ 1.571180] epic100 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, high) -> IRQ 18 [ 1.571347] epic100 0000:01:08.0: MII transceiver #3 control 3000 status 7809. [ 1.572226] epic100 0000:01:08.0: Autonegotiation advertising 01e1 link partner 0001. [ 1.586771] FDC 0 is a post-1991 82077 [ 1.659612] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[e8002000-e80027ff] Max Packet=[2048] IR/IT contexts=[4/4] [ 1.665416] eth0: SMSC EPIC/100 83c170 at 0xd000, IRQ 18, 00:e0:29:2a:75:ff [ 1.694264] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 [ 1.694273] alloc irq_desc for 19 on node -1 [ 1.694276] alloc kstat_irqs on node -1 [ 1.694286] ohci1394 0000:01:07.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 [ 1.696146] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64. [ 1.696506] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 [ 1.696513] forcedeth 0000:00:04.0: PCI INT A -> Link[APCH] -> GSI 21 (level, high) -> IRQ 21 [ 1.696520] forcedeth 0000:00:04.0: setting latency timer to 64 [ 1.696579] nv_probe: set workaround bit for reversed mac addr [ 1.748077] ohci1394: fw-host1: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[e7005000-e70057ff] Max Packet=[2048] IR/IT contexts=[4/8] [ 2.217111] forcedeth 0000:00:04.0: ifname eth1, PHY OUI 0x732 @ 1, addr 00:e0:18:f3:b5:65 [ 2.217117] forcedeth 0000:00:04.0: timirq lnktim desc-v1 [ 3.020182] ieee1394: Host added: ID:BUS[1-00:1023] GUID[120050c500000be2] [ 7.331811] kjournald starting. Commit interval 5 seconds [ 7.331825] EXT3-fs: mounted filesystem with writeback data mode. [ 21.837339] udev: starting version 147 [ 22.967575] udev: renamed network interface eth1 to eth4 [ 24.119067] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000 [ 24.119092] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5500 [ 24.915543] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 24.924450] udev: renamed network interface eth0 to eth3 [ 25.366394] parport_pc 00:0b: reported by Plug and Play ACPI [ 25.366465] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] [ 25.597665] ieee1394: raw1394: /dev/raw1394 device initialized [ 25.652837] ppdev: user-space parallel port driver [ 25.865778] Linux agpgart interface v0.103 [ 25.899001] nvidia: module license 'NVIDIA' taints kernel. [ 25.899008] Disabling lock debugging due to kernel taint [ 26.159533] nvidia 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, high) -> IRQ 19 [ 26.160072] NVRM: loading NVIDIA Linux x86 Kernel Module 96.43.13 Thu Jun 25 18:42:21 PDT 2009 [ 26.438167] video1394: Installed video1394 module [ 26.500175] psmouse serio1: ID: 10 00 64 [ 27.123936] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input4 [ 27.249168] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.155134] Linux video capture interface: v2.00 [ 29.249650] nf_conntrack version 0.5.0 (16383 buckets, 65532 max) [ 29.249936] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 29.249938] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 29.249941] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 33.189831] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17 [ 33.189839] alloc irq_desc for 17 on node -1 [ 33.189842] alloc kstat_irqs on node -1 [ 33.189851] ENS1370 0000:01:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, high) -> IRQ 17 [ 35.684048] eth3: Setting full-duplex based on MII #3 link partner capability of 41e1. [ 37.603760] EXT3 FS on sda2, internal journal [ 38.328016] eth3: no IPv6 routers present [ 42.303693] kjournald starting. Commit interval 5 seconds [ 42.567500] EXT3 FS on sda1, internal journal [ 42.567512] EXT3-fs: mounted filesystem with writeback data mode. [ 47.663297] NET: Registered protocol family 24 [ 52.700019] eth4: no IPv6 routers present [ 63.252439] QEMU Accelerator Module version 1.4.0, Copyright (c) 2005-2008 Fabrice Bellard [ 63.252534] KQEMU installed, max_locked_mem=513296kB. [ 66.540233] lp0: using parport0 (interrupt-driven). [ 128.532596] ondemand governor failed, too long transition latency of HW, fallback to performance governor [ 1735.224647] ISO 9660 Extensions: Microsoft Joliet Level 1 [ 1735.253188] ISOFS: changing to secondary root [ 2230.684049] eth3: Setting half-duplex based on MII #3 link partner capability of 0001. [ 2235.684051] eth3: Setting full-duplex based on MII #3 link partner capability of 41e1.